ESD PEEK rod, Anti-static PEEK

Material: ESD PEEK | Anti-static PEEK, Black

Click Here for Material Datasheet →

Dimension: Dia.: 6 ~ 60mm

L.: 1000mm

Surface Resistance : 10⁶ -10⁹ Ω

(For details, please check below stock program or contact us)

Description

ESD PEEK is an electrically modified plastic material with a defined surface resistance between 106 -109 Ω. Due to its electrostatic dissipation properties, this material is commonly used in applications within the semi-conductor industry. ESD PEEK has excellent dimensional stability and can be machined easily to very tight tolerances.

Feature

– Surface resistivity of 106 – 109 Ω

– High structural strength and stiffness

– Excellent dimensional stability

– High Temperature Resistance

Applications

– Critical test fixture applications

– Wafer handling

– Structural applications in wet process tools where static dissipation is important

– ensitive circuits, circuit boards and hard drive disks

– Components in high-speed electronic printing

Material Data Sheet

PEEK ESD | PEEK Anti-static

– offers the advanced properties of PEEK partnered with excellent resistance to static.

Physical Properties
Density	ISO 1183-1	g/cm³	1.43
Water absorption	ISO 62	%	0.2
Mechanical Properties
Tensile strength	ISO 527-2	Mpa	110
Elongation at Break	ISO 527-2	%	20
Tensile Modulus of elasticity	ISO 527	Mpa	3800
Notched Impact Strength(charpy)	ISO 179	KJ/m²	8.2
Ball-indentation Hardness	ISO2039-1	Mpa	218
Hardness	DIN 53505	Shore D	88
Thermal Properties
Melting temperature	ISO11357-3	^℃	343
Thermal conductivity	DIN52612-1	^W/(m*K)	0.25
Thermal capacity	DIN52612	^KJ/(kg*K)	1.34
Coefficient of linear thermal expansion	DIN53752	^{10-6 K-1}	50
Service temperature – long term	–	^℃	-40 ~ 260
Service temperature – short term	–	^℃	310
Heat deflection temperature	DIN EN ISO 75	^℃	152
Electrical Properties
Surface Resistivity	VDE0303	^ohms	10^6-9
Volume Resistvity	VDE0303	^ohms.cm	10^6-9
Dielectric Constant	DIN53483		3.2
Dielectric Loss Coefficient	DIN53483		0.003
DIelectric strength	VDE0303	^kV/mm	19
Miscellaneous Data
Flammability	UL94		V0
NOTE: The data stated above are typical values intended for reference and comparison purposes only. The data should not be used as a basis for design specifications or quality control. The information is provided as a guide to the best of our knowledge and given without obligation or liability. Testing under individual application circumstances is recommended.