Russian
English
Insulated Flanged Bushing | Sleeve Bearings
- High Loading
- Low Friction
- Self-lubrication
- Wear Resistance
- Chemical Resistance
- Good Electrical Insulation
- Applicability in the food industry (FDA)
Description
Insulated Flanged Bushing, Sleeve Bearings produced by SNC Plastic are mainly machined from plastic profiles and injection molded. Metal bearings, washers are basically only machined. Therefore, the engineering plastic bearing is also more diversified in the molding process, which greatly improves the production efficiency and reduces the cost.
The performance of engineering plastic bushings, sleeve bearings depends on the raw material, SNC Plastic provides engineering plastics such as POM, PA Nylon, PTFE and PEEK… In addition, by selecting the corresponding base material, adding reinforcing fibers, special lubricants, wear-resistant agents, etc., the engineering plastics are modified to improve their physical properties.
SNC Plastic’s capabilities include injection molding, machining and complete inspection equipment. We can provide solutions for plastic bushings, sleeve bearings and washers in various materials according to customer’s application requirements
See all available sizes in the chart below
Insulated Flanged
Bushings | Sleeve Bearings
– PA Nylon | POM | PTFE | PEEK
· High Loading · Low Friction · Self-lubrication
· Wear Resistance · Good Electrical Insulation · Chemical Resistance
· Heat Resistance · Applicability in the food industry (FDA)
| ID | OD | LTB | F.OD | F.T | ID | OD | LTB | F.OD | F.T | |
| For 3/16” Dia. Shaft | For 7/16” Dia. Shaft | |||||||||
| 3/16” | 5/16” | 1/4” | 3/8” | 3/64” | 7/16” | 9/16” | 1/2” | 11/16” | 1/16” | |
| 3/16” | 5/16” | 1/4” | 7/16” | 1/16” | ||||||
| 3/16” | 5/16” | 1/2” | 3/8” | 3/64” | For 1/2” Dia. Shaft | |||||
| 3/16” | 5/16” | 1/2” | 7/16” | 1/16” | 1/2” | 5/8” | 1/4” | 7/8” | 1/16” | |
| 1/2” | 5/8” | 3/8” | 7/8” | 1/16” | ||||||
| For 1/4” Dia. Shaft | 1/2” | 5/8” | 1/2” | 3/4” | 1/16” | |||||
| 1/4” | 3/8” | 5/16” | 1/2” | 1/16” | 1/2” | 5/8” | 1/2” | 7/8” | 1/16” | |
| 1/4” | 3/8” | 3/8” | 1/2” | 1/16” | 1/2” | 5/8” | 5/8” | 3/4” | 1/16” | |
| 1/4” | 3/8” | 3/8” | 9/16” | 1/16” | 1/2” | 5/8” | 5/8” | 3/4” | 3/32” | |
| 1/4” | 3/8” | 1/2” | 1/2” | 1/16” | 1/2” | 5/8” | 5/8” | 7/8” | 1/16” | |
| 1/4” | 3/8” | 1/2” | 1/2” | 3/32” | 1/2” | 5/8” | 3/4” | 3/4” | 1/16” | |
| 1/4” | 3/8” | 1/2” | 9/16” | 1/16” | 1/2” | 5/8” | 3/4” | 7/8” | 1/16” | |
| 1/2” | 5/8” | 1” | 3/4” | 1/16” | ||||||
| For 5/16” Dia. Shaft | 1/2” | 5/8” | 1” | 3/4” | 3/32” | |||||
| 5/16” | 7/16” | 3/8” | 9/16” | 3/64” | 1/2” | 5/8” | 1” | 7/8” | 1/16” | |
| 5/16” | 7/16” | 7/16” | 9/16” | 1/16” | 1/2” | 3/4” | 7/16” | 7/8” | 1/16” | |
| 5/16” | 7/16” | 1/2” | 9/16” | 1/16” | 1/2” | 3/4” | 1/2” | 1” | 1/8” | |
| 5/16” | 1/2” | 3/8” | 11/16” | 1/16” | 1/2” | 3/4” | 3/4” | 7/8” | 1/16” | |
| 1/2” | 3/4” | 1” | 7/8” | 1/16” | ||||||
| For 3/8” Dia. Shaft | 1/2” | 3/4” | 1” | 7/8” | 1/8” | |||||
| 3/8” | 1/2” | 3/8” | 5/8” | 1/16” | ||||||
| 3/8” | 1/2” | 3/8” | 5/8” | 1/8” | For 5/8” Dia. Shaft | |||||
| 3/8” | 1/2” | 1/2” | 5/8” | 1/16” | 5/8” | 3/4” | 3/8” | 15/16” | 1/16” | |
| 3/8” | 1/2” | 1/2” | 5/8” | 3/32” | 5/8” | 3/4” | 3/4” | 15/16” | 1/16” | |
| 3/8” | 1/2” | 3/4” | 5/8” | 1/16” | 5/8” | 3/4” | 3/4” | 15/16” | 1/8” | |
| 3/8” | 1/2” | 3/4” | 5/8” | 1/8” | 5/8” | 13/16” | 5/8” | 1-1/16” | 5/32” | |
| 3/8” | 5/8” | 1/2” | 7/8” | 1/8” | 5/8” | 7/8” | 3/4” | 1-1/16” | 1/16” | |
| 3/8” | 5/8” | 3/4” | 7/8” | 1/8” | 5/8” | 7/8” | 3/4” | 1-1/8” | 1/8” | |
| 5/8” | 7/8” | 1” | 1” | 1/8” | ||||||
| ID | OD | LTB | F.OD | F.T | ID | OD | LTB | F.OD | F.T | |
| For 3/4” Dia. Shaft | For 1” Dia. Shaft | |||||||||
| 3/4” | 7/8” | 1-1/4” | 1-1/16” | 1/16” | 1” | 1-1/4” | 1” | 1-7/16” | 1/16” | |
| 3/4” | 7/8” | 1-1/4” | 1-1/4” | 3/16” | 1” | 1-1/4” | 1” | 1-7/16” | 1/8” | |
| 3/4” | 1” | 3/4” | 1-1/4” | 5/32” | 1” | 1-1/4” | 1” | 1-1/2” | 3/16” | |
| 3/4” | 1” | 3/4” | 1-1/4” | 3/16” | 1” | 1-1/4” | 1-1/2” | 1-1/2” | 1/8” | |
| 3/4” | 1” | 1” | 1-3/16” | 1/16” | 1” | 1-1/4” | 1-1/2” | 1-1/2” | 3/16” | |
| 3/4” | 1” | 1” | 1-3/16” | 1/8” | ||||||
| 3/4” | 1” | 1” | 1-1/4” | 5/32” | For 1-1/4” Dia. Shaft | |||||
| 1-1/4” | 1-1/2” | 1-1/2” | 1-3/4” | 1/8” | ||||||
| For 7/8” Dia. Shaft | ||||||||||
| 7/8” | 1-1/8” | 1-1/8” | 1-5/16” | 1/16” | For 1-1/2” Dia. Shaft | |||||
| 1-1/2” | 1-3/4” | 2” | 2” | 1/8” | ||||||
